Architectural
Ohm
Light runs alone a wire. An almost imperceptible wire hung in the air. With this wall system, the light goes where it’s needed. Ohm is an electro mechanic project that takes maximum advantage of the characteristics of luminous diodes. The secret of Ohm is a special unipolar wire stretched from wall to wall. Customizable accessories allow the suspended installation.
It is possible to replace the light source even with the luminaire assembled.
- OHM SPOT: MAX 350MA DC - 3.6W LED
- *MAX 4 SPOTS ON UNIPOLAR WIRE.
- COLOR TEMP: 2700K OR 3000K
- BEAM SPREADS: 14º, 24º, 36º, OR 50º
- UNIPOLAR WIRE LENGTH: MAX 60V DC
- 39.4’ (12M), 78.7’ (24M), OR 157.5’ (48M)
- TIE ROD (2 PIECES: NEGATIVE/POSITIVE): Ø4.7” X 2.4” H
- SHADE SIZE: Ø2.4” X 4.3” H
- WALL/CEILING ROSE: 6.7” H X 14” W X 2.3” D
- WIRE GUIDE: Ø1.2” X 1.7” H
- *WEIGHT KIT AVAILABLE.
- REMOTE DRIVER REQ:
- INPUT 120V 60HZ / OUTPUT 350MA DC 18.5W
- PUSH/1-10V DIMMABLE
